CWM Recovery for Micromax A56 & A57

CWM Based Recovery For Micromax A56 And A57 Ninja

I Am Not Responsible For Any Problem

Instructions:

1.Enable USB Debugging by going to Menu -> Settings -> Applications -> Development - Enable USB Debugging.


2.Download the CWM Recovery.

Click this button to download CWM(Mediafire Link)

3.Make Sure Ninja Drivers Install In Your PC.

4.Tutorial To flash CWM Recovery On Micromax A56 & A57

Using ADB/Fastboot: Follow commands while device is connected with PC in USB Debugging Mode

Open Command Prompt and locate your .android folder that contain the copy of above Recovery Image. (Mine is C:/Android/a57recovery.img)
Press shift Key and Right click on empty sapce then only OPEN COMMAND WINDOW HERE appears like the picture below

C:\Documents and Settings\ViOLET R>cd c:\android
C:\Android>adb devices List of devices attached Micromax-A56 device
C:\Android>adb reboot-bootloader [ Before typing this, Boot the phone in recovery mode(Vol + and Power Buuton) and select REBOOT SYSTEM NOW and while rebooting Hold Vol-. Then the screen would stuck in Superfone Ninja 3 Logo. Don't get panic. Now only the phone is FASTBOOT MODE ]
C:\Android>fastboot devices COOLPADA7019 fastboot
C:\Android>fastboot erase recovery erasing 'recovery'... OKAY [ 0.109s] finished. total time: 0.156s
C:\Android>fastboot flash recovery a57recovery.img sending 'recovery' (4436 KB)... OKAY [ 0.406s] writing 'recovery'... OKAY [ 0.813s] finished. total time: 1.219s
C:\Android>fastboot reboot rebooting... finished. total time: 0.016s

You are done Now Reboot into Recovery using VOLUME+ and Power Button Operation. Enjoy Method

Source: XDA Developers



..................................................................................................................................

Touch CWM Recovery for Micomax A57

ClockWorkMode Recovery(TOUCH):

Features:

• Touch Interface
• Terminal access from memory
• ADB root in recovery
• Full wipe before flashing new ROM

Instructions:

1. Download and install "RECOVERY MANAGER" app
3. Install the RecoveryManager app
4. Download recovery.img file from below
6. Place "recovery.img" file in the /SDcard (Root of SD card)
7. Open the RecoveryManager App and select "install recovery" button
8. Then select the "recovery.img" file.(Please be patient or it might not flash right) 
9. Done :)

Screen Shots:

Credits:

PaneerSelvam, DineshKumar, DineshPalaniswamy, RushiPawar, Sasa Kovacic.